Safe shopping
Cheap and fast delivery
Free shipping on orders over $30.00
90 Days Easy Returns View More Return Policy
Stix Waterborne Bonding Primer is a premium quality, waterborne, acrylic urethane primer sealer with unparalleled adhesion to the most challenging surfaces, including PVC, vinyl, plastic, glass, tile, glazed block, glossy paints, pre-coated siding, fiberglass, and galvanized metals. Stix primer is also ideal for use on plaster, drywall, wood, and non-ferrous metals, where a low ambient or surface temperature would present a problem for conventional primers. This house paint primer offers an extremely hard film when cured. Use it on interior and exterior surfaces and topcoat with almost any type of coating including Alkyd, Acrylic Latex, Urethane, Epoxy, and Lacquer finishes. Stix waterborne primer levels to a smooth surface and cleans up with soap and water. Interior and exterior surfaces including drywall, plaster, ceiling, acoustical tile, wood trim & doors, formica, ceramic tiles, glossy Surfaces, PVC plastic, masonry walls, wood, trim, shutters, masonry, stucco, concrete, cement block, galvanized metal, aluminum, etc.
Use a ¾ -inch nap roller for best results on porous surfaces and use a brush for tough to roll areas.
Sand the tile lightly before priming. Use a 4" fine nap roller or foam roller for the best coverage.
For hard to clean metal surfaces, use a scrubbing pad or brush. Then apply primer with a fine nap roller, brush or sprayer.
Prior to priming, ensure the surface is clean and dry. Use a short nap roller or nylon polyester brush.
Lightly sand before priming. Use a short nap roller or nylon polyester brush.
In order to achieve the best results, sand or scuff the surface first, then apply primer using a soft bristle for even coverage.