Shopping Cart: 0 items

Sub-Total:

$0.00

Your cart is empty.

Shopping Cart

Home Automotive Exterior Accessories 411 Decals Aftermarket Replacement for Mercury 115 Blue (1999-2004) Outboard Decal (Sticker) Set

411 Decals Aftermarket Replacement for Mercury 115 Blue (1999-2004) Outboard Decal (Sticker) Set

$75.00 $37.00
Save: 51% off

Safe shopping

Cheap and fast delivery

Free shipping on orders over $30.00

90 Days Easy Returns View More Return Policy

Description

Brand	411 DECALS
Color	Blue
Cartoon Character	Bubble
Number of Pieces	1
Age Range (Description)	Adult
Reusability	Single Use
Finish Type	Laminated

Aftermarket replacement decal set
Digitally printed on polymeric foil and laminated
Resistant to heat, cold, moisture, oil, UV rays
This is not an OEM decal - this is reproduction, similar to the original
May differ from original in color, size or shape

Product information

Brand

411 DECALS

Color

Blue

Cartoon Character

Bubble

Number of Pieces

Age Range (Description)

Adult

Reusability

Single Use

Finish Type

Laminated

Package Dimensions

13.94 x 2.95 x 2.56 inches

Item Weight

10.4 ounces

Manufacturer

4.11 Decals

ASIN

B09WYZ4PJZ

Customer Reviews

Best Sellers Rank

#642,912 in Automotive (See Top 100 in Automotive)
#21,874 in Automotive Decals

Date First Available

March 31, 2022

Product Description

411 Decals Compatible Replacement for Mercury Outboard Decal (Sticker) Set

Aftermarket replacement decals set made to fit Mercury Outboard. Digitally printed on polymeric foil and laminated. Resistant to heat, cold, moisture, oil, UV rays. This is not an OEM decal, this is reproduction, similar to the original. May differ from original in color, size or shape. Logos are copyrighted by their respective owners; Made in EU.

SURFACE PREPARATIONS

Fiberglass

Clean surface with acetone. After solvent has evaporated wipe down area with soapy water (a few drops of hand dishwashing liquid mixed with water in a spray bottle).

Plastics and Glass

Wipe surface clean with a window cleaner. Remove any tape or glue residue with a single edge razor blade or plastic scraper.

Painted Metals and Base Metals

Clean surfaces with a solvent such as Lacquer Thinner. Dry the surface with a lint free cloth before the solvent evaporates and re-clean with a soapy water solution before applying graphic.

APPLICATION INSTRUCTIONS

Step 1	You will need masking tape, spray bottle, dish washing liquid, and a tape measure.
Step 2	Using the masking tape to underline where you want to place the vinyl sign. If you have letters that drop below the line, remove tape in that area.
Step 3	With you spray bottle, mix a solution of 20 drops of Joy, Ivory, etc in one pint of water. Carefully spray the soapy water on the area where you want to place the vinyl.
Step 4	Place the Graphics face down and peel away the waxed paper backing. Then spray the solution on the back of the vinyl sign. Be sure the Graphics is adhering to the application tape.
Step 5	While the area is still very wet, place the Graphics in the selected position. The soapy water allows you to slide Graphics into place. Gently rub palm over Graphics. The water has no bearing on the adhesion; it is only for positioning the Graphics and removing the air bubbles.

Step 6	Use the an squeegee or credit card to squeeze the water out from under the Graphics. Squeegee in all directions and repeat several times. This process removes air and water from under the Graphics.
Step 7	Let the Graphics dry completely. The amount of time needed to dry depends on the temperature and the humidity. Estimated time: 80 degrees 30 minutes, 70 degrees 3 hours, 50 degrees 4 to 6 hours. The Graphics MUST dry prior to the next step. 60, 70, 80 degrees are recommended temperatures for post installation.
Step 8	Slowly peel back the premask translucent application tape, the Graphics will adhere to the boat. If the Graphics don't adhere to the boat, you didn't wait long enough for the water to dry behind the Graphics, repeat squeegee process. LET DRY.
Step 9	Now check for any bubbles. If you and any, place a small piece of premask tape over the area, squeeze to the closest edge. If you still have a small bubble you can pop it with a pin. Small bubbles will eventually disappear from the sun over time.